Equalization
Parametric EQ
Equalization is an all-analog parametric equalizer making you able to shape your tone easily and create unique character or change the tone print of your instrument completely . Perfect choice for any pedalboard either you plug into a guitar, bass, drum machine, synthesizers, steel drums, car stereo, or wherever!
Equalization can give you up to 20dB boost or cut for Bass & Treble and up to 15dB for Middle boost or cut, letting you choose the right spot in the sea of tonal possibilities. You can pair it up with any other pedal reviving an old tone or give new edges and experience of full frequency response.
With Equalization there are so many ways to change or enhance your tone, you can place it at the beginning of your chain to alter the overall character of your guitar, or use it at the end to filter and boost output at the end of a long cable run and fine-tune your tone. Also, Equalization is perfect as a frequency booster in any place in your chain, making you able to boost exactly the frequencies that suits you!!
Demo Video & Audio Samples
Photo Gallery
Controls
-
1. Hi - Boost or Cut 20dB at 6,3KHz approximately.
The center position is flat. -
2. Low - Boost or Cut 20dB at 100Hz approximately.
The center position is flat. - 3. Middle - Boost or Cut 15dB. The center position is flat.
-
4. Mid Freq. - Sets the Middle frequency from 240Hz to 5KHz.
The center position is approximately at 1KHz.
Hi and Low Controls
Low Boost or Cut, as you can see in the graph, approximately at 100Hz, shaping the body and bottom of the guitar’s tone.
Hi Boost or Cut approximately at 6,3KHz, meaning that 6,3KHz is the center frequency, the highest point, so you can adjust your overall highs.
Middle and Mid Freq. Controls
Middle Boost or Cut your mids in a fixed Q setting for easy use. The Boost or Cut range is 5dB less than Low and Hi but is more than enough!
Mid Freq. sweeps the middle frequencies in order to boost or cut the selected one. Boosting and cutting mids drastically changes the tone of your instrument, you can even make a Les Paul sounds like a Strat and vice versa!
Tech Specs
Measures:
7.5 x 12 x 5.6 cm / 2.9 x 4.7 x 2.2 inches with knobs and everything
Current Draw:
4mA
Input Impedance:
1MOhm
Output Impedance:
<1KOhm
Switching
This device is true bypass. Audio will pass without power.
Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!